WPA is widely supported by wireless cards and allows you to set your own password. Disable UPnP as there are vulnerabilities with this feature. It is strongly recommended you read and understand all information before making any changes to the listed defaults. If you are using your wireless connection and make any changes you will lose you wireless connection. Configure the wireless on the device to provide a wireless network using the exact same wireless network name, same security and same password as the Time Capsule network and it will “extend” the wireless just fine. Notice that the configuration has two options:
|Date Added:||24 August 2010|
|File Size:||6.3 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
To start the conversation again, simply ask a new question.
Notice that the configuration has two options: When setting up or changing your wireless settings it is a good idea to be plugged into the router with your network cable and not your wireless connection. User profile for user: Once you have your security set more boxes will appear on screen. This is a good way for a standard user to find the network, but also why it is important to have wireless security in place.
You may decide what the Routers IP will be going forward. Help answer questions Learn more. Need help finding you router IP address? You don’t want to be wirelessly configuring the router.
If you have changed it and don’t remember it you may have to reset your device to factory default using the reset button on most routers. A pass phrase of 22 characters including spaces is recommended.
When setting up a router for the first time, refer to the manual and use maf installation CDs that come with it.
If you are unsure, leave g2 as the default Thank you Bob and LaPastenague. Here is where you can set the security for the wireless portion of your network. Reply Helpful Thread reply – more options Link to this Post. Continue to the Wireless tab. Is this article up to date?
Re: Linksys WRTN v2/Mac issues – Linksys Community
Router Networking Devices In other languages: On this page, jac will find many options which allow you to restrict access by day, hour and personal computer. Use an ethernet cable, and plug your computer into the router.
Skip to main content. Enter the wanted password into both Router password slots.
Wireless Setup – Linksys – WRT160N v2 (Linksys Firmware)
Click the Status tab to verify connectivity and router status. Thank you for your feedback! This password will be entered to make configuration changes going forward.
Then it will act just like an Ethernet switch to provide the extra Ethernet ports that you need. Configure the wireless on the device to provide a wireless network using the exact same wireless network name, same security and same password as the Time Capsule network and it will “extend” the wireless just fine.
Wireless Setup – Linksys – WRTN v2 (Linksys Firmware) | ™
Site Map of PcWinTech. Be sure use a name that does NOT linkssys you or your family. That is why this type of setup is called a “roaming network. This article has also been viewedtimes. Note that this will restore the settings to those when it was new, so all previous configuration will be lost.
That is the MAC address of the wireless router to which you are currently connected.