Disabled This option allows you to enable or disable the EPA logo. Boot Other Device Default: Installing an expansion card 1. Align the card connector with the slot and press firmly until the card is completely seated in the slot. Disabled If this option is enabled, you can use the following two items to see the typematic rate and the typematic delay settings for your keyboard.

Uploader: Kazijin
Date Added: 14 November 2015
File Size: 25.96 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 18897
Price: Free* [*Free Regsitration Required]

It is suggested to select high-quality, certified fans in order to avoid damage to the motherboard and CPU due to high temperatures. On This option defines if the keyboard Num Lock key is active when your system is started. However, if the optimized performance parameters are not supported by your hardware devices, it will likely cause system reliability and stability issues.

SuperStep Superstep is a powerful and easy-to-operate tool for overclocking. Tested to comply with FCC standards. Enabled This option is used to enable or disable the system to be waken up by onboard LAN. Operation is subject to the following two conditions: Hot Key Function As Default: Be sure to unplug the AC power supply before adding or removing expansion cards or other system peripherals, especially the memory devices, otherwise your motherboard or the system memory might be seriously damaged.


The system will automatically wake up when the modem receives an incoming call.

Foxconn FX7MF-S motherboard |

Resources Controlled By Default: Init Display First Default: Be sure your selection is right. It also addresses the connection of your power supply, use of the rear panel connectors, connection of hard drive and floppy drive data cables, and setting up various other feature of the motherboard.

Day of Month Alarm This option is used to set the timing for the start-up day of the month. INTR Audik connector connects to the chassis security switch on the case.

When the system is in S0 status, the LED is on. Therefore, you should install CPU cooling fan and make sure that the cooling fan works normally at all times in order to prevent overheating and damaging to the CPU.

Foxconn 661FX7MF-S – motherboards specifications.

This section explains how to use the various functions of this motherboard by changing the jumper settings. Graphics Engin Clock Default: After making all the connections, replace the system case cover. Both This option is used to set the ports of onboard IDE.

After applying power Led on the system front panel case lights up.


SerialATA is capable of delivering 1. The setting values are Enabled, Disabled. It’s a community-based project which helps to repair anything.

Foxconn 661FX7MF-S – motherboard – micro ATX – LGA775 Socket – SiSM661FX

Gate A20 Option Default: Make sure to unplug the power cord before adding or removing any expansion cards. Return the jumper setting to normal pins 2 and 3 locked together with the jumper cap. You must install at least one memory module to ensure normal operation.

Front Panel Connector If you do not want to use the Front Audio, pin 5 and 6, pin9 and 10 must be short, and then the signal will be sent to the rear audio port.

Disabled This option is used to enable or disable case opened warning function. IrDA Header optional Disabled This option is used to enable or disable IRQ8 break suspend. Please refer to your CPU fan user guide to install it properly.