ASUS ADSL MODEM AM602 DRIVER

The router then reboots to activate the settings. Restore Default Click Restore Default Settings to delete all current settings and restore the router to its factory default settings. Click Add to add a new connection for the WAN interface. Click Yes to continue. Click Browse to locate the file. The list for the installed network components is displayed. To establish a connection using an Ethernet cable, plug one end of the Ethernet cable to the LAN port on the router rear panel and the other end to the Ethernet port on your PC.

Uploader: Shasho
Date Added: 4 March 2010
File Size: 18.2 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 54593
Price: Free* [*Free Regsitration Required]

Flashing Data is being sent or received. Enter text from picture: The USB driver installation is completed. Follow the instructions for the operating system that you are using. Enter the IP address adwl the management station allowed to access the local management services.

Update Software Follow these steps to update your software: Obtain an updated software image file from ASUS. Select an appropriate sm602 free from obstructions or any possible interference. Summary Click Summary to display the version information of your router and the realtime status of the DSL connection. Select the WAN interface that you will be using. Page of 48 Go. Click Add to add a new connection for the WAN interface.

  K9A2 RAID DRIVER DOWNLOAD

AM | Networking | ASUS India

If you select Local, events will be recorded in the local memory. A successful connection is established between the Solid router and PC through an Ethernet cable. Click Save to save the new settings. Select Enable to enable the log mode.

Assign a priority level low, medium, and high to this traffic class. A Found New Hardware Wizard window appears. The system is detecting the new hardware device. Flashing The router is trying to connect to your ISP. Check if the settings are correct. Do not change these settings unless directed by your ISP. The default username is admin, and password is admin lowercase.

Ethernet connection You can use either the Ethernet cable or the USB cable supplied in the package for Ethernet connection. Give a name to this traffic class.

You can use either a straight-through or a crossover cable for Ethernet connection. Here is an example of PPPoE connection type. To configure a new WAN interface: If RIP is enabled, the router operation can be configured as active or passive. Click Apply to save and activate the settings.

  ACER MONITOR AL1511 DRIVER

By pressing ‘print’ button you will print only current page. The Found New Hardware window appears.

ADSL 2+ Router + USB

Disable the bridge service if desired. The list for the installed network components is displayed. The Save button only saves the LAN configuration data, but does not apply the configurations. A login window appears.

Also enter the username and password assigned by the DDNS service.