BLACKHAWK XDS100V2 DRIVER DOWNLOAD

The device boots into Debian Linux automatically but if you want to program down on the bare metal, you have to flash an image onto an SD card on your PC then put it into the BBB. I bought a complete adapter kit from tin can tools but it turns out all I needed was the JTAG header: Follow the instructions you get with the JTAG emulator. Samtec part number FTRG 20 pin male connector, surface mount , which looks like this once you get it soldered onto the bottom of the board: Now you can power up your BBB but, since you are going to program on the bare metal with this, you need to avoid booting the BBB in Linux.

Uploader: Natilar
Date Added: 21 October 2004
File Size: 18.72 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 84459
Price: Free* [*Free Regsitration Required]

Follow the instructions you get with the JTAG emulator.

If you immediately hit the debug button the little bugit will bring up a dialog box giving you a choice. Hold down the S2 button and then the power button at the same time on the BBB.

Use Tag-Connect with TI DSP’s – Tag Connect

Ultimately, it should say that it successfully initialized the BBB and the dialog box will say that it is loading your program onto the BBB: Click on the Verify button and you should see something like this xds1100v2 if you scroll all the way to the bottom of it:. It turns out that there’s just something about using CC Studio from a linux VMWare image that just doesn’t work right.

When you get that bad boy connected, your rig looks like the following: I single step machine instruction to instruction without delay. When you get that bad boy connected, your rig looks like the following:. At the very least it’s a good way to show people hardware in action even if it’s painful.

  LACIE FIREWIRE 400 PCI CARD DRIVER

I installed everything on a Windows machine next-door and it is not slow at all. I think it’s effectively a little serial bus that weaves around to the various components on the chip and then makes that available to devices like TI’s “Blackhawk” JTAG Emulator. Samtec part number FTRG 20 pin male connector, surface mountwhich looks like this once you get it soldered onto the bottom of the board:. To actually install i.

It didn’t link properly. Now you can power up your BBB but, since you are going to program on the bare metal with this, you need to avoid booting the BBB in Linux.

Debugging from a Mac slow [updated next day] On the mac, it is unbearably slow and I keep thinking that xdx100v2 CC Studio has frozen but I’m hoping this is a weird thing that is happening because I’m running Linux in VMWare on my Mac instead of running it natively.

There is no Mac version so I am stuck.

Because of all of these system-on-a-chips like the Sitara on the BBB, there are literally no physical pins that you can connect to to ask what’s on the bus and what’s in the registers and so on. Ultimately, it should say that it successfully initialized the BBB and the dialog box will say that it is loading your program onto the BBB:. After another 20 seconds, it will take you to a breakpoint at sds100v2 start of your main program: Also, if I want to just play around with ARM assembly code I can do that by booting in Linux and ssh’ing onto the device.

  COBRA S9I DRIVER DOWNLOAD

How to debug imx28_evk using JTAG

Previously it looked like you needed to worry about these things called. It’s pretty cool; you can check out all of the registers as you single step, either by assembly instruction or by C statement.

On the mac, it is unbearably slow and I keep thinking that the CC Studio has frozen but I’m hoping this is a weird thing that is happening because I’m running Linux in VMWare on my Mac instead of running it natively.

Click on the Verify button and you should see something like this dialogue if you scroll all the way to the bottom of it: I bought a complete adapter kit from tin can tools but it turns out all I needed was the JTAG header: JTAG is the answer to that. Menu Close Home Subscribe. I installed the new version of Linux in a new VMware but the same thing happened. Install CC Studio first!

TMDSEMU100V2U-20T XDS100v2 JTAG emulator 20 pin compact TI connector

The device boots into Debian Linux automatically but if you want to program down on the bare metal, you have to flash an image onto an SD card on your PC then put it into the BBB. I never try that out because it sounds like an incredible pain.

Once you finish that, it should bring you up into your little project: This means you should be ready boackhawk try blacknawk a simple program.