DIP switches 3, 5, and 8 should be in the down position. US Robotics 56K Faxmodem. Product Type Data Modem. There should be a place in the Setup section of your software for this. See the diagrams below. Card is in good physical condition. We appreciate your patience and opportunity to correct a situation if that happens.
|Date Added:||8 May 2007|
|File Size:||47.69 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
All calls are routed differently, so try placing the call again. This modem requires a hardware handshaking cable.
Troubleshooting and Help Resources
Ship the unit, postage paid, in a strong box made of corrugated cardboard with plenty of packing material. There should be no line splitters, fax machines, or other devices between the modem and the wall jack.
If the Communications ports have yellow exclamation points or red Xs over them, your COM ports may be configured incorrectly. Skip to main content.
US Robotics 33.6 Sportster Faxmodem 0839
I have no doubt it would work fine. More refinements More refinements Got one to sell? Are the DIP switches on the back of your modem set correctly? Make sure you are using an RS modem cable. Do not have the CD or manual for this. Check the packaging of the cable you bought. When Control Panel opens, double-click Modems. If there are DIP switches on the back of your modem, are they tree correctly?
Look for another modem already in the machine. Guaranteed Delivery see all. Be sure to have your modem’s model number handy before you call tech support. This modem is previously used and pulled from a machine. This modem is previously used and pulled from a machine.
US Robotics drivers free download software for all devices
Item Location see all. Also, use the power supply that came with your modem; other similar-looking power supplies may be of different voltages and could damage your modem.
See the diagram below for the correct settings. Lot of 5 U. Manuals and other Documents. US Robotics 56K Faxmodem. The USRobotics modem you have installed should be present in the list of installed modems.
You can also add, remove, or view the properties of modems from this window. This modem requires a hardware handshaking cable, which is packaged with your modem.
Your communications software may not function properly if you have more than one version of the software installed, you are using an older version, or you have more than one communications software installed on your system. All Auction Buy It Now. Refer to your computer’s manual for information about enabling COM ports. Downstream Data Rate see all. Product sent to the repair address without an RMA number will be returned unopened. Robotics Line Sharing Device.