If you have a defective cartridge or printhead, it might be under warranty. If alignment continues to fail when the PQ Diagnostic page shows no streaks in the color blocks in Test Pattern 2, then the printer must be serviced. The carriage moves to the left side of the printer. If the ink tubes are bundled incorrectly and are kinked , skip to the solution to service the printer. It matches the product:

Uploader: Kenris
Date Added: 22 March 2018
File Size: 37.2 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 23379
Price: Free* [*Free Regsitration Required]

Power specifications Power consumption: Issue After installation of a new printhead, the device display reads ‘ Alignment Failed ‘. Do not proceed until the carriage is on officdjet left.

Print PQ Diagnotic through Toolbox. Print and evaluate a Print Quality Diagnostics Page The Print Quality Diagnostics Page can help determine if the printer needs to be aligned or if the printheads need to be cleaned or if the linefeed needs to be calibrated. If you do not use genuine HP cartridges, the steps in this document might not resolve the issue.

How does HP install software and gather data? For successful alignment, the patterns on the alignment page must be sharply printed.


If the lines in Test Pattern 1 are straight and connectedofficsjet to the step to examine Test Pattern 2. Already have an HP account? Please try again shortly. Print and evaluate a Print Quality Diagnostic page After cleaning or if you are not sure a cleaning is requiredprint a Print Quality Diagnostic page. Wait until the carriage is idle and ofcicejet. One or more of the values entered is not permitted. If the ink tubes are bundled incorrectly and are kinkedskip to the solution to service the printer.

Remove selected files Download files. If there are white lines through ALL the color blocks and white lines through the gray blocks in Test Pattern 3do not clean the printheads.

HP Officejet Pro L All-in-One Printer – Driver Downloads | HP® Customer Support

The Print Quality Diagnostic page shows which printhead should be replaced. If unused, plain white paper was loaded, and an alignment page did print, check the alignment page. If, after calibrating linefeed, there are still lines through the gray blocks in Test Pattern 3, service the printer. Environmental specifications Recommended operating conditions Recommended operating temperature range: Modify your browser’s settings to allow Javascript to execute.

The list of all available drivers for your product is shown above. These limits are designed to provide reasonable protection against harmful interference in a residential installation.


HP Officejet Pro L7680 All-in-One Printer Troubleshooting

If the carriage does not foficejet to the left automatically, turn the printer off and back on and then try holding down the OK button again. Please verify your product is powered on and connected, then try again in a few minutes.

The printer prints the alignment page. Newly installed printheads must be aligned to the printer for best print quality. If you are not satisfied with your printed page quality, or want more densely printed prints, increase the print quality. Is my Windows version bit or bit?

Use an automated tool to align the printhead If the lines in Test Pattern 1 are not straight and connected, follow these steps to align the printer. Open download list Product sold up warranty: The following video demonstrates how to replace a printhead.

You do not need to replace cartridges until you are prompted to.