Arm Plate – Lever arm – used to lift the pressure plate lifter. Never load mixed types of paper at the same time. Strip – Encoder strip – Clear strip with position marks – Used by the sensor in the carriage assembly to determine position. Cable Carriage – Cable assembly which connects the main logic board to the carriage motor. You did the above so you can move the carrier back and forth. A cheap and charming color laser printer A cheap and charming color laser printer by Dan Ackerman.

Uploader: Tygosho
Date Added: 11 May 2008
File Size: 31.28 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 49159
Price: Free* [*Free Regsitration Required]

I than move the carrier to the left and continue washing to the right. Answer questions, earn points and help others Answer questions.

Cleaning the print shaft: Holder – Ink cartridge holder – located on carriage unit, holder secures ink cartridge in place.

HP c Ink | Deskjet c Ink Cartridges

Answered on Sep 25, Make sure that the paper width and paper length adjusters are set for the correct paper size. Not sure on this model.

Tablets by Dan Ackerman 8 days ago. Cover – Top cover assembly Glacier Gray – Does not include keypad assembly or carriage access door.


Pinchwheel – Pinch assembly kit – includes all required pinch wheels, pinchwheel mounts and springs. Plug in the power cord.

HP DeskJet 648c

Motor – Carriage motor assembly includes cable. Printers HP DeskJet c. Answered on May 30, Click the button that opens the Properties dialog box. Click the tab that provides paper type and size settings.

HP parts for CA DeskJet C Printer

Cable – Cable assembly – Has 5-pin F connector on each end – It will come off at the ends so try not to pull on it too hard. Distilled water is recommended.

If the printr contacts show noticeable damage, have your printer serviced.

Make sure it moves back and forth easily. If this wont get the printer working it can be fault in the printer’s motherboard. Clean the contacts in the carriage with a paper towel dampened with water.

Answered on Nov 08, pribter Check the condition of the paper, and then reload it Replace any ripped, dusty, wrinkled, or bent paper. Sensor Open – Door sensor assembly – open door sensor. Arm Plate – Lever arm – used to lift the pressure plate lifter. Disconnect the power cord from the wall outlet. Solution This problem may occur when the printer is on before the computer is turned on or restarted.


HP Deskjet 648c Standard Color Inkjet Printer USB Parallel C6466A

Bracket Tension – Belt tension bracket – holds the carriage belt idler pulley. On your machine as the symptoms didn’t sound like jp you might try just doing the first two things. Chassis – Chassis assembly – the large plastic item that forms the base of the print mechanism.

Make sure it moves back and forth easily. Resetting the printer prunter not fix the problem. Feed Rollers – Feed roller assembly – includes frame asembly, shaft with rollers, and encoder disk. Anyone else found a fix to this problem? But to clean them right you need to use a rubber cleaning fluid.