Most of the network card’s parameters can be changed using ifconfig 8 and wiconfig 8 deprecated , in NetBSD 3. Apple provide software for setting up an Apple Airport Base Station. The number of available channels depends on your country, To use them, add one of the following to your kernel config: This means acting as a gateway between clients which do not communicate directly. Windows gave the answer as it was using 0xcc and the card working.
|Date Added:||28 October 2005|
|File Size:||7.2 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Lucent WaveLAN/IEEE Bronze – WikiDevi
It was also sold by many OEM companies. Mass Uses WaveLan wireless cards became enormously popular with schools when the Erate initiative to put wireless into every classroom first started back in the 90s.
Use ifconfig 8dhclient 8 or whatever you normally use. In theory, there is no reason wavealn the card could not be configured as a true access point. The number of available channels depends on your country, See also Hoang Q.
WEP encryption can be enabled using ” ifconfig nwkey ” with a number of options, see ifconfig 8 for more information. To use them, add one of the following to your kernel config:.
Lucent WaveLAN/IEEE Bronze
Once you have good communication with the base station or other ad-hoc device, you should configure the wireless network interface just like you would any other lcent interface. You’ll see ping times go up, but your power consumption should decrease. See apmd 8 for details Here’s some quick-and-dirty scripts to get you going: The above example also shows how to set WEP keys, see ifconfig 8 for more documentation.
Remember that you can get a list of available media and media options with “ifconfig -m wi0”. In the kernel config file, it looks like this:.
WaveLAN – Wikipedia
On certain machines the wi will appear to work until traffic is actually sent, at which point it will lock the entire machine. If there is no change, you may need to adjust the channel your card is communicating on, using ” ifconfig ath0 chan XX ” for channel XX.
See apmd 8 wavrlan details. Wireless cards do luxent a lot of power; if you plan on using this while unplugged from the mains, its is recommended. If in doubt, please refer to the documentation that came with your card or access point. Make sure that the channel you select is the same channel your access point or the other card in an ad-hoc network is on.
Acting as an access point In theory, there is no reason why the card could not be configured as a true access point. This is a common problem with laptops; documentation is somewhat sparse, and NetBSD isn’t very good yet at all forms of autodetection.
Assuming that the defaults are correct for your network, you should see “Current netname” or SSID change to reflect the name of the wireless network which has been set in the access point your card is communicating with. To determine if your network connection between your wireless card and a base station lhcent enabled, check ifconfig 8 output, status should be “active” there.
Using WaveLAN IEEE under NetBSD
In one case this range may not work for you! WaveLan Marketed WaveLan was marketed by several companies who also marketed their wireless bridges and routers. Comments, additions, and corrections welcome. Power-saving can be enabled with ” ifconfig ath0 powersave “, use ” ifconfig ath0 -powersave ” to disable luvent again.
How to fix this? Tran’s web page on how to build a wireless Windows gave the answer as it was using 0xcc and the card working.
In particular, you may need to tweak the iomem and possibly iosize parameters of the pcic 4 device. Remember, these values are probably not right for you!! To use them, add one of the following to your kernel config: Using the network Once you’ve booted a kernel with a This is probably obvious to some, but if you don’t see the PCMCIA card, the problem probably lies with the configuration of the pcic device.